SCALEXIO

SACLEXIO is the latest generation of Hardware-in-the-loop (HIL) simulators from dSPACE, and comes in variations from small off-the-shelf systems to large customer tailored systems. A HIL-simulator, like SCALEXIO, can be used for a broad range of testing, but is mainly utilized for ECU testing. During ECU testing, the ECU is connected to the HIL-system and tested in a virtual environment where, for instance, engines and vehicles are replaced with models. Real loads can also be connected to the HIL-system during ECU testing.

All SCALEXIO simulators are equipped with industrial-grade processors which gives a very high computational capacity. The processors can also be replaced for newer ones when desired. Today’s processors have multiple cores and for extensive simulation models up to seven cores can be used. If this isn’t enough, additional HIL-systems from dSPACE, even older variants, can be connected for more computing capacity.

There are different I/O-solutions for the SCALEXIO so the system can be adjusted after customer needs. The I/O can, for example, be configurated to be either analog or digital from software. Most channels are also equipped with a Failure Insertion Unit (FIU) for fault injection. All configuration of I/O for the SCALEXIO is handled through the graphical tool ConfigurationDesk.

There is also support for Functional Mock-up Interface (FMI) so the simulation models can come from different sources.

 

Ask a question Read more at dSPACE

Related products: SCALEXIO

  • ConfigurationDesk

    ConfiguratonDesk provides a graphical interface for configuration of the hardware in the SCALEXIO system. A Hardware-in-the-loop (HIL) application always contains at least two different parts: one behavior model and one I/O model. By separating these models it is possible to… Read more

    Ask a question Read more
  • ControlDesk

    ControlDesk is the software which connects the user to the real-time simulation. Through ControlDesk, the user can easily control, read and change parameters in Simulink® models which are simulated on the real-time platform. This gives full control and insight of the… Read more

    Ask a question Read more
  • AutomationDesk

    AutomationDesk is a graphical tool which offers a powerful and user-friendly test automation environment. It is used to implement test cases and automate tests for around the clock testing. No deep knowledge about programming is required from the user and automated… Read more

    Ask a question Read more
  • Automotive Simulation Models (ASM)

    Automotive Simulation Models (ASM) is a large collection of Simulink®-models and tools for simulation of combustion engines, vehicle dynamics, electronic components and traffic situations. The models are modular and constructed in a logical way, and no functionality is hidden by… Read more

    Ask a question Read more
  • VEOS, PC based simulation platform

    VEOS is a PC based simulation platform that enables verification and validation of software early in development. VEOS can, for example, run models from Simulink®, virtual ECUs, Functional Mock-up Units (FMU), communication busses and environment models. Integrate Models  VEOS supports… Read more

    Ask a question Read more
  • SYNECT

    SYNECT is a data management and collaboration software tool with a special focus on model-based development and ECU testing. It helps you handle models, signals, parameters, tests, test results, etc., as well as their dependencies, versions and variants, and the… Read more

    Ask a question Read more
  • ConfigurationDesk
  • ControlDesk
  • AutomationDesk
  • Automotive Simulation Models (ASM)
  • VEOS, PC based simulation platform
  • SYNECT

Ask a product question about:

Your Subject

Your Message

Your Name

Your Email (*)

Menu